Mindray TRIO Instruções de Operação descarregar pdf (Página 112)

Trio™ Operating Instructions 0070-10-0666-01 2 - 83

Operations Recorder (Optional)

Printer Setup Menu Selections

Real-Time Print

1. Using the PRINTER SETUP menu, select the waveforms to print on the recorder strip.

The user can designate a maximum of two (2) waveforms to print, WAVEFORM 1 and

WAVEFORM 2. The user may opt to set one (1) waveform to OFF, in which case one

(1) waveform and the numeric data will print. If both waveforms are set to OFF, the

monitor will print only the numeric data for available parameters. If no waveforms are

displayed on the screen both waveforms will automatically default to OFF and only the

numeric data for available parameters will print.

2. If the user does not designate which waveforms to print in Printer Setup, pressing the

PRINT key will automatically default to printing the first two (2) waveforms displayed on

the screen.

3. Select TIME in the PRINTER SETUP menu to designate the time length of the waveform

printout. Select CONTINUAL for a continuous waveform printout. Select 8s for an 8

second waveform printout.

4. When the print settings have been selected in the PRINTER SETUP menu, press the

PRINT key on the front panel keypad to initiate a real-time printout.

5. Press the PRINT key again to stop a printout that is already in progress.

NOTE: If a printout has started, and a parameter alarm prompts an

additional printout, the alarm printout will not begin until

the current printout is complete.

WAVEFORM 1: Allows the user to designate the first of two (2) waveforms to print. If

the user selects OFF, no waveform will print as WAVEFORM 1.

Selections are: Any waveforms currently displayed and OFF.

WAVEFORM 2: Allows the user to designate the second of two (2) waveforms to print.

If the user selects OFF, no waveform will print as WAVEFORM 2.

Selections are: Any waveforms currently displayed and OFF.

TIME: Allows the user to select the duration of the waveform print. Selections

are: CONTINUAL and 8s (8 second).

INTERVAL: Allows the user to select the interval at which real-time printouts will

automatically occur. Selections are: OFF, 10min, 20min, 30min,

40min, 50min, 1HR, 2HRS, 3HRS, and 4HRS.

SPEED: Allows the user to select the speed at which the waveform section of

the printout is output. Selections are: 25.0 mm/s and 50.0 mm/s.

GRID: Allows the user to select a print format either with or without a

background grid. Selections are: OFF and ON.

CLEAR PRINT

TASK:

Allows the user to clear a print task already in progress or to clear

multiple print tasks from the system.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 169 170

Sem comentários

Mindray TRIO Instruções de Operação Página 112