Mindray DPM 1 Manual do Operador descarregar pdf (Página 69)

6-9

Icon name Icon Description

Received

Signal

Strength

This icon tells the received signal strength for corresponding

channel. With the received signal strength changing, the number of

the signal bars and the color of the icon will change accordingly.

 White: indicates the received signal strength is normal.

 Yellow: indicates the received signal strength is weak.

 Red: indicates no signal is received.

Transmitter

Number

TEL

XXXX

Shows the transmitter number corresponding to this channel.

6.3 Display Setup

Clicking the “Display Setup” in the drop-down menu of a patient window will enter a tab

sheet, in which you can perform “Multibed Waveform Setup” and “Multibed Numeric Setup”

for the current patient window.

6.3.1 Multibed Waveform Setup

On the left of the “Display Setup” tab sheet, you can designate which waveforms are to be

displayed in the current patient window.

 By ticking a “Waveform Name”, you can select or deselect this waveform. Only the

selected waveforms can be displayed in the current patient window.

 By clicking the “Sweep Speed”, you can have a list of available wave speeds (i.e. 6.25

mm/s, 12.5 mm/s, 25 mm/s and 50 mm/s), from which you can select either.

 Select a waveform by clicking on its name and change its order by clicking “Move

First”, “Move Up”, “Move Down” or “Move Last”. Waveform displaying order can be

saved.

 When monitoring ECG with the monitor, the lead to be monitored is optional. If you are

monitoring with a 3-lead set, you can select any one lead to be displayed in 1 channel. If

you are monitoring with a 5-lead set, you can select any two or three leads to be

displayed. If you are monitoring with a 12-lead set, you can select up to eight leads to be

displayed. For details, refer to operation manual of the bedside monitor.

 When monitoring ECG with the telemetry transmitter, the lead to be monitored is fixed.

With a 3-lead set, you can only monitor the lead II in 1 channel. With a 5-lead set, you

can only monitor the leads II, V and I in 3 channels. For details, refer to operation

manual of the bedside monitor.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 189 190

Sem comentários

Mindray DPM 1 Manual do Operador Página 69